quick and easy step-by-step instructions
Quick and easy step-by-step instructions to control the main functions and to configure system settings of your spa from its in.k500 main spa keypad.
Depending on your spa configuration, control up to 2 pumps, a blower and a light system. Refer to the manual to identify the configuration of your spa. The following quick start instructions are based on a 2 pumps and lights spa configuration.
Quick and easy steps to control your spa main functions and enjoy your spa immediately, using a dual pump and light system configuration as an example.
start, select speed and stop pump 1
start, select speed and stop pump 2
turn lights on or off
set spa water desired temperature
wake keypad up after inactivity
One press gives you access to an intuitive and comprehensive menu to manage the settings of your spa.
select a water care configuration from a list of 5 factory set but user configurable modes
disconnect or unpair your Bluetooth audio source when using the in.stream
select and activate maintenance reminders or standby mode. The system will remind you when maintenance is required
date and time
adjust time of day and configure year, date, and time formats
change the temperature unit, language, display orientation, rim light color and keypad security
connect your spa system to your wireless Internet home network
low-level and electrical configurations of your spa system (authorized spa technician only)
to reset all settings to factory default values and configurations
Control your in.clear system directly from your keypad
displays software and revision numbers of your spa system components
read complete user instructions in the in.k500 techbook
GECKO ALLIANCE GROUP
450 des Canetons, Québec, QC, Canada, G2E 5W6, 418 872-4411
©2017 Gecko Alliance Marketing Services